Table of Contents
Advertisement
Parts and their functions
[WIPE] button
This is used to execute the transition using the pattern
selected by the number key (9).
When the [WIPE] button is pressed and it is selected, its
indicator lights in amber.
If the [MIX] button () is now pressed, it goes off, and the
de-selected status is established.
[CUT] button
This button is used to execute transitions instantly.
Its indicator lights in amber during a transition, and it goes
off when the transition is completed.
Only KEY1 is enabled when KEY is set.
[AUTO] button
This is used to automatically execute transitions (auto
transition) using the transition time which has been set on
the Time menu.
During auto transition its indicator lights in amber.
When the button is pressed again during auto transition,
the auto transition operation is suspended, and the
indicator lights in green. When it is pressed again while
auto transition is suspended, the remaining transition is
executed.
The indicator goes off when auto transition is completed.
When the [AUTO] button is pressed while the fader lever
() is at an interim setting, the transition is executed in the
time remaining from the interim setting.
Only KEY1 is enabled when KEY is set.
[FTB ON] button
This button is used to execute fade-out to a black screen/
white screen/Still/Clip/color background screen or
fade-in from a black screen/white screen/Still/Clip/color
background screen for the transition time which has been
set on the Time menu.
[KEY1 ON], [KEY2 ON], [KEY3 ON] button
This button is used to execute the key transition for the
transition time which has been set on the Time menu.
[DSK1 ON], [DSK2 ON] button
This button is used to execute fade-in or fade-out of
downstream key for the transition time which has been set
on the Time menu.
Bus tally LEDs
These indicate the output statuses of the A bus and B bus.
The LED corresponding to the bus whose program signals
(PGM) are being output lights.
Wipe direction selection buttons
(WIPE DIRECTION) [N/R], [R]
These buttons are used to select the direction in which to
wipe for executing background transitions.
When the [R] indicator is off:
Wiping proceeds in the normal direction.
When the [R] indicator is lit:
Wiping proceeds in the reverse direction.
When the [N/R] indicator is lit:
The normal direction is replaced with the reverse
direction (or vice versa) when the transition is
completed.
(The lit and extinguished statuses of the [R] button
are also switched in line with the direction of the
wiping.)
Fader lever
This is used to execute background or KEY1 transitions.
When it is moved as far as it will go, the transition is
completed. When it has been operated during auto
transition, auto transition will be switched to manual
operation as soon as the fader position overtakes the
amount of the transition being executed.
21
Advertisement
Table of Contents
