Panasonic AV-UHS500P Operating Instructions Manual page 142

External interfaces
w Control using the GPI Input port
Assign Item
AUTO AUTO button in transition area
CUT CUT button in transition area
KEY ON KEY1 to KEY3 button in transition area
DSK ON DSK1, DSK2 button in transition area
FTB FTB button in transition area
BKGD AUTO AUTO button when the background is selected
BKGD CUT CUT button when the background is selected
KEY AUTO AUTO button when the key is selected
KEY CUT CUT button when the key is selected
REC Still1 Still1 recording
REC Still2 Still2 recording
REC Clip1 Clip1 recording start
REC Clip2 Clip2 recording start
STOP Clip1 Clip1 recording stop or playback stop
STOP Clip2 Clip2 recording stop or playback stop
PLAY Clip1 Clip1 playback start
PLAY Clip2 Clip2 playback start
AUX XPT Crosspoint buttons (1 to 24) used to switch the AUX buses.
1 to 24 p Select the AUX buses (AUX1 to AUX4) to be controlled using the
menu.
REDTly DSBL Red tally signal is not output
GRNTly DSBL Green tally signal is not output
AUXTly DSBL AUX tally signal is not output
No Assign No function assigned
Description of function assigned
142
Control method
Operations are performed using
contact inputs (30 ms or more).
Functions are enabled using
contact inputs (or disabled in open
status).