Table of Contents
Advertisement
Input/output signal settings
Color Corrector
Make settings for the Color Correctors built in to SDI IN5 to
SDI IN8 and the following optional units.
1 On the Input sub menu, use [F2] to select the input to
be set using the Select item.
Refer to "Input signal settings".
Color Corrector settings
1 Use [F1] to display the C/C Operation sub menu.
2 Use [F2] to set the Color Corrector to enable (On)/
disable (Off).
3 Use [F3] to set the color range of the input signal in the
Limit item.
Off
No limit on color range.
108
The amplitude level of each color (R, G, B) is
limited to between 0% and 108%.
104
The amplitude level of each color (R, G, B) is
limited to between 0% and 104%.
100
The amplitude level of each color (R, G, B) is
limited to between 0% and 100%.
Process control
1 Use [F1] to display the C/C Process sub menu.
2 Use [F2] to set the gain value of the Y signal in the
Y-Gain item.
3 Use [F3] to set the value of the pedestal level in the
Pedestal item.
4 Use [F4] to set the gain value of the saturation in the
C-Gain item.
5 Use [F5] to set the amount of change of the color hue in
the Hue item.
Tone curve
Corrects the tone of the input signal.
Set the tone curve to adjust the brightness, contrast, etc., of
images.
You can adjust the white balance and the color tone by
separately adjusting each of the R, G, and B colors.
Tone1 Black
Tone2 Gray L
Tone3 Gray H
Tone4 White
Tone1 Black
Adjusts the black level.
Tone2 Gray L
Adjusts the gray Low level.
Tone3 Gray H
Adjusts the gray High level.
Tone4 White
Adjusts the white level.
1 Use [F1] to display the C/C Tone1 Black sub menu.
2 Use [F2] to adjust the R signal of the black level in the
Red item.
3 Use [F3] to adjust the G signal of the black level in the
Green item.
4 Use [F4] to adjust the B signal of the black level in the
Blue item.
5 Use [F5] to make the link settings for the adjustment
value in the RGB Link item.
Off
RGB can be independently set in each of
the C/C Tone1 Black, C/C Tone2 Gray L, C/C
Tone3 Gray H, and C/C Tone4 White sub
menus.
On
The Red setting value is set in Green and
Blue in each of the C/C Tone1 Black, C/C
Tone2 Gray L, C/C Tone3 Gray H, and C/C
Tone4 White sub menus.
100
Advertisement
Table of Contents
