Table of Contents
Advertisement
System settings
Setting the built-in display
backlight and button illumination
Setting the built-in display backlight
The built-in display backlight can be set to ON or OFF.
It is also possible to automatically turn off the built-in display
backlight when no control panel operation is performed within
a set time interval.
CONF
1 Press the
button to light its indicator, and display
SYS
the Config menu.
2 Use [F1] to display the LCD Backlight sub menu.
3 Use [F2] to select the setting for the backlight using the
Light item.
On
Backlight is turned on all the time.
Off
The backlight turns off as soon as "Off" is
selected as the setting.
It lights up when the control panel is
operated.
(The "On" status is selected as the setting.)
60, 120, 180
When no control panel operation is
performed within a set time interval
(60 minutes, 120 minutes, 180 minutes),
the built-in display backlight is turned off
automatically.
Even when the set time interval elapses
and the display backlight is turned off, the
backlight comes back on when a control
panel operation is performed.
4 Use [F3] to set the brightness of the backlight using the
Adjust item.
Setting the button illumination
The button indicators in the areas listed below can be kept
illuminated all the time.
It is then easier to read the characters displayed on the
buttons even when the unit is operated in dark places.
p Memory/wipe pattern/number key area
p User button area
p Display area
p Crosspoint area
p Transition area
CONF
1 Press the
button to light its indicator, and display
SYS
the Config menu.
2 Use [F1] to display the Button Illumination sub menu.
3 Use [F2] to make settings for the memory/wipe pattern/
number key area, the user button area, and the display
area in the Dimmer item.
Off
The button illumination does not light.
80% to 150% The button illumination lights. Brightness can
be adjusted between 80% and 150%.
4 Use [F3] to make settings for the button selected in the
Lighting item.
80% to 150% The button illumination lights. Brightness can
be adjusted between 80% and 150%.
5 Use [F4] to make settings for the button when off in the
XPT Color item.
Input
Make the button illumination light white.
Color
8 different colors can be set.
Group1 to 8
6 Use [F5] to make settings for the button when off in the
Transition Color item.
Input
Make the button illumination light white.
Color
8 different colors can be set.
Group1 to 8
7 Use [F1] to display the Button Color Group1 sub menu.
8 Use [F2] to [F4] to set the [R], [G], and [B] for button
illumination.
123
Advertisement
Table of Contents
