Table of Contents
Advertisement
Input/output signal settings
Initializing the color corrector
1 Use [F1] to display the C/C Setting sub menu.
2 Use [F2] to select the initialization target in the Init
Target item.
Process
The settings in the C/C Process sub menu
are initialized.
Tone
The settings in the C/C Tone1 Black, C/C
Tone2 Gray L, C/C Tone3 Gray H, and C/C
Tone4 White sub menu are initialized.
RGB Matrix
The settings in the C/C Matrix R/G and C/C
Matrix B sub menu are initialized.
All
All are initialized.
Copying settings
You can copy the Color Corrector setting information that was
set for another input.
1 Use [F1] to display the C/C Setting sub menu.
2 Use [F4] to select the copy target in the Copy Target
item.
3 When the Copy From item in [F5] is pressed, the
settings selected as the Copy Target are copied.
102
Advertisement
Table of Contents
