Table of Contents
Advertisement
Wipe
Selecting the wipe pattern for background transition
Set the wipe pattern for background transition.
1
Select the <ME1>/<ME2> button → [BKGD] → [BKGD Pattern] tab.
2
Set an item in [Pattern] in the [BKGD Pattern] column.
f Select the wipe pattern for background transition.
r Wipe pattern screens for background transition
Selecting the wipe direction
Press a wipe direction selection button to select the wipe direction for the background transition.
For details, refer to "Transition area" (page 23).
r Fader lever operations and wipe directions (when WIPE: 7 is selected as a wipe pattern)
Wipe decorations (border, soft effect)
Add a border effect or soft effect to the wiping of background transitions.
1
Select the <ME1>/<ME2> button → [BKGD] → [Edge Border] tab.
2
Select an item in [Border] in the [Border] column.
[Off]
[On]
Chapter 5 Basic Operations — Wipe
A
<N> button
A B
B
A
B
B
Does not add the border effect.
Adds the border effect.
<R> button
<N/R> button
B A
A B
A
A B
A B
– 48 –
Advertisement
Table of Contents
