Related Manuals for Panasonic AV3 FS
Summary of Contents for Panasonic AV3 FS
- Page 1 For detection: Non Seal Type Switches AV3 ( FS ) Switches Contact gap 1 mm Type Product Catalog 2022.4...
-
Page 2: Typical Applications
Long hinge lever 0.44 N AV3235G3 AV3435G3 AV3835G3 Simulated roller lever 0.54 N AV3245G3 AV3445G3 AV3845G3 Roller lever 0.59 N AV3255G3 AV3455G3 AV3855G3 Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 1 ー AECTB11E 202204 Panasonic Industry Co., Ltd. 2022 industrial.panasonic.com/ac/e/... -
Page 3: Specifications
14.5±0.8 mm CONTACT FORM N.O. N.C. Please refer to "the latest product specifications" when designing your product. •Requests to customers: https://industrial.panasonic.com/ac/e/salespolicies/ Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 2 ー AECTB11E 202204 Panasonic Industry Co., Ltd. 2022 industrial.panasonic.com/ac/e/... -
Page 4: Technical Terminology
Malfunction shock ... Shock range where a closed contact does not open for longer than a specified time due to shocks during use of the snap-action switches. Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 3 ー AECTB36E 202204 Panasonic Industry Co., Ltd. - Page 5 Position degree position to its original position. Total travel The stopping position of the actuator after Position degree total travel. Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 4 ー AECTB36E 202204 Panasonic Industry Co., Ltd. 2022 industrial.panasonic.com/ac/e/...
- Page 6 8) If snap-action switch operation is synchronized with the AC supply phase, this may cause: shortened electrical life, contact fusion failure, contact transfer, or other reliability problems. Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 5 ー AECTB36E 202204 Panasonic Industry Co., Ltd.
- Page 7 Varistor Load 3) Avoid circuits which apply voltage between contacts. (This may lead to mixed deposition.) Wrong 200 V 100 V Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 6 ー AECTB36E 202204 Panasonic Industry Co., Ltd. 2022 industrial.panasonic.com/ac/e/...
- Page 8 OP Min - 100% of OT = 8.0 - 1.2 = 6.80 mm The plunger/lever should be pressed down to the position of 6.80 to 7.16 mm from the mounting hole. Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 7 ー AECTB36E 202204 Panasonic Industry Co., Ltd.
- Page 9 In terms of the packing format used, make every effort to keep the effects of moisture, organic gases and sulfide gases to the absolute minimum. Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 8 ー AECTB36E 202204 Panasonic Industry Co., Ltd. 2022...
- Page 10 Possible lever The force required for pin plunger action is lighter than that of the lever, and the stroke is longer. Panasonic Industry Co., Ltd. Electromechanical Control Business Division ー 9 ー AECTB36E 202204 Panasonic Industry Co., Ltd. 2022 industrial.panasonic.com/ac/e/...
- Page 11 Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industral.panasonic.com/ac/e/ Specifications are subject to change without notice. 2022.4 ©Panasonic Industry Co., Ltd. 2022 AECTB11E 202204...