Table of Contents
Advertisement
Setting the source name
Setting the source name display panel
Set the display of the source name display panels on the crosspoint area and KEY/DSK operation area.
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select an item in [Type] in the column that displays the source name to be set.
[Default]
[User]
[Picture]*
* This function will be available in V2.00.00 or higher.
Displaying a desired source name
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select [Name] in the column that displays the source name to be set.
f Enter a desired name with the on-screen keyboard.
Displaying bitmap data
@
NOTE
t This function will be available in V2.00.00 or higher.
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select [Load Picture] in the column to be set.
f Bitmap data in the memory card inserted to the memory card slot is obtained.
f For Still 1V to Still 4V/Still 1K to Still 4K/Clip 1V to Clip 4V/Clip 1K to Clip 4K, bitmap data is automatically generated.
r Bitmap data specification
PNG format file with a 42×52 pixel size is loaded. Color image data is converted to gray scale when being loaded.
Setting the lighting status when the crosspoint area is off
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select an item in [Color Group] in the column that displays the source name to be set.
f Select an item from [ColorGroup1] to [ColorGroup8].
For details, refer to "Setting the colors when the buttons are turned off" (page 135).
Setting the MultiView display
Set the MultiView display.
1
Select the <CONF> button → [SOURCE NAME] → [MV Name] tab.
2
Select an item in [Type] in the column that displays the source name to be set.
[Default]
[User]
[Same as Panel]
Displaying a desired source name
1
Select the <CONF> button → [SOURCE NAME] → [MV Name] tab.
2
Select [Name] in the column that displays the source name to be set.
f Enter a desired name with the on-screen keyboard.
Chapter 7 CONFIG Menu — Setting the source name
Displays the same name as the column name.
Displays a desired name.
Displays bitmap data.
Displays the same name as the column name.
Displays a desired name.
Links to the setting from the <CONF> button on the top menu → [SOURCE NAME] → [Panel Name] tab.
f When [Picture] is selected in the [Panel Name] tab, this setting links to the [Default] setting.
– 119 –
Advertisement
Table of Contents
