View Point Status; Table 5: Screen Area Definitions - Bosch D1260 Owner's Manual

4. The display will change to show on the top line the
area name and the current status on the second
line.
Next>
Pressing the soft key will change the
display to the next area and remain for 20 seconds
Next>
or until the soft key is pressed for the next
area. If the time has elapsed, the display returns to
idle text.
<Previous
Pressing the
display to the previous area.
<Exit
5. Press the soft key to return to idle text.

View Point Status

Use this function to identify the number or location of
each point in an area, and to show the current
condition of any point you select.
1. Ensure your keypad shows idle disarmed text.
Menu>
2. Press the key to enter the Command
Menu.
Next>
3. Press repeatedly until you reach the
PT STATUS ?>
prompt.
Press the adjacent soft key.
4. In this example, Area 1 is the area and there are
eight points assigned to area 1 that can be viewed.
Next>
Press the soft key to view the first point in
<Previous
the area; press the
last point in the area. You may press the
key at any time to exit this function.
Bosch Security Systems | 9/04 | 50410D
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - View Point Status
soft key will change the
VIEW
soft key to view the
<Exit
soft
5. The top line indicates that you are still in View
Point Status mode. The second line will display the
point text.
Next>
Pressing the soft key takes you to the next
point in the area whereas the
will take you to the previous point in the area.
To view the status of a point, press the
key.
Status>
6. After pressing the
center will display the following information:
Refer to Table 5 for more information.

Table 5: Screen Area Definitions

Line Area Name Definition
#
1 Area # This may display numbers 1 to 8.
Pt # This may display point numbers 1
to 127 and 129 to 247,
2 (Point Normal
State), HW
Open
Short
Missing
<Previous
soft key
Status>
soft
key, the command
indicates that the point
is not in the faulted
state.
indicates that the point
is in an open state.
indicates that the point
is in a shorted state.
indicates that the point
is missing.
69