Bosch D1260 Owner's Manual page 59

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)
5. If the card is accepted, the display changes to
Card added.
either or
already exists in your system.
<Exit
Pressing the soft key exits out of this
function and returns the display to idle text.
Next>
Pressing the soft key exits out of this
function and returns the display to either
Add/Change Level.
Add/Change Sub-User ID
For each user in the system, there can be up to four
access cards; one Master User (assigned in the
prompt) and up to three sub-users.
Sub-User>
1. Pressing the
add/change a user's Sub-User access card or
credential.
2. The display changes to
Sub-User IDs?
to add or change any of this user's
sub-user IDs.
Yes>
Pressing the soft key will jump to Step 3.
No>
Pressing the soft key will jump to
Add/Change Passcode.
Bosch Security Systems | 9/04 | 50410D
Card changed
if the card
Card>
soft key will allow you to
User 123 Add/Change
3. The display changes to
<Sub-User 1
Press the
sub-user 1.
Press the <Sub-User 2
sub-user 2.
Press the <Sub-User 3
sub-user 3.
Press the Exit> soft key to return to the main
/ Change User
display.
4. If adding or changing a sub-user and a card reader
is connected to your system, the display changes to
Add Change Sub-User 1: Present card to
(or )
card reader now.
If the display changes to
your security company.
If 20 seconds elapse without pressing a key the
display returns to idle text. Pressing the
key exits out of this function and returns the
display to the main Add / Change User
Select Sub-User:
soft key to add or change
soft key to add or change
soft key to add or change
Add
D9210 not ready
, contact
<Exit soft
display.
59