Door Control (Command + 4 + 6); Description; Using Door Control - Bosch D1260 Owner's Manual

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DOOR CONTROL (COMMAND + 4 + 6)
Enter the new date using a MM/DD/YY format.
Ex: If the desired time is January 1, 2002,
press 0 + 1 + 0 + 1 + 0 + 2
Enter>
7. Press the soft key or the [ENTER] button.
Time/Date Display>
8. The
how the time and date entered will look.
9. The new time and/or date is displayed for 20
seconds before the display returns to idle text.
<Exit
Press the soft key to return to idle text.
Bosch Security Systems | 9/04 | 50410D
soft key is used to show

DOOR CONTROL (COMMAND + 4 + 6)

Description

There are three functions with the door control
function:
Cycle Door
– momentarily unlocks a door to
allow a person into an area
Unlock Door – unlocks a door to allow free access
Secure Door
– locks a door and prohibits access
regardless of a user's authority level

Using Door Control

1. Ensure your keypad shows idle disarmed text.
2. Press the COMMAND key. The display shows
*System Command*
4
3. Press the key and the
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the DOOR CONTROL
?> prompt, press its adjacent soft key.
4. The display will change and show a choice of
Cycle Door> Unlock Door>
,
Door>
.
Press the adjacent soft key.
.
6
key.
Secure
, and
41