Using View Log - Bosch D1260 Owner's Manual

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter)

Using View Log

1. Press the View Log ?>
2. The display changes to Enter start date:
Go to last event>
Press the
last event in the log.
<Exit
Press the soft key to exit this function and
return to idle text.
3. Enter the start date in the form of mm/dd.
For example, to enter 7/14 as the start date, press
+ 7 + 1 + 4
Once you start entering digits, the
event>
soft key is replaced with the
key.
Press the <Exit soft key to exit this function and
return to idle text.
4. Press either the Enter>
button.
5. If the date entered is valid, the first event for that
date will appear.
<Exit
Press the soft key to exit this function and
return to idle text.
If the date entered is invalid (there are no events
with that date in the log), it will display the next
latest event in the log.
Press the <Exit soft key to exit this function and
return to idle text.
64
soft key.
soft key to go to the
Go to last
Enter>
soft
soft key or the ENTER
6. The display will show one of two ways depending
on if the date entered was for an event first in the
log or not.
If the date was for the first event in the log, it
will display the next latest event in the log.
If the date was for an event (not the first) in the
log, the display will be the same except the
<Previous soft key has been added.
0
<Exit
Press the
return to idle text.
Next>
7. Press the
the log.
If there are no more events in the log,
Log* will appear.
<Previous
Press the
event in the log.
<Exit
Press the
return to idle text.
Bosch Security Systems | 9/04 | 50410D
soft key to exit this function and
soft key to go to the next event in
*End of
soft key to go to the previous
soft key to exit this function and