Turning On The System (Arming) With Doors Or Windows Open - Bosch D1260 Owner's Manual

D1260/D1260B | Owner's Manual | Part II: System Commands - Turning On the System (Arming) With Doors or
Turning On the System (Arming) With
Doors or Windows Open
If a protected door or window is open, you may have
the option of "force arming" with that point faulted.
Faulted points (opened doors or windows) that are
force armed are not included in the system. The
remaining points arm normally.
Force armed points either return to normal operation
after you turn off your system or return to normal
when the door or window is closed. Your system might
not offer force arming or it may be restricted to specific
points. Contact your security company for more
information.
1. Use your passcode or an arming function to start
the arming process.
Check Area #
7. The display shows
8. One of the messages below may display in place of
Check Area #
.
Indicates the system is programmed not to arm
with particular points faulted (doors or windows
open).
Indicates that the system's number of allowable
bypassed points has been reached. Your system's
maximum number of bypassed and/or force
armed points is set by your security company.
Check with them to learn this number.
Bosch Security Systems | 9/04 | 50410D
Indicates that more than the number of allowable
points are faulted. Bypassed points are counted as
faulted. Your system's maximum number of
bypassed and/or force armed points is set by your
security company. Check with them to learn this
number.
9. The display shows
Ready to Arm
.
10. Pressing the
specifics for any points that are faulted, if any, and
bypassed, if any.
Faulted points are displayed first then bypassed
points.
11. The display changes to show the number of faulted
points in the area.
Press Next> soft key repeatedly to scroll through
the point text for each faulted point.
If you do not want to go through the list of faulted
points and want to go directly to the
soft key or
COMMAND button.
AREA 1 WAREHOUSE Not
.
View Points>
soft key will show the
Force Bypass>
soft key, press the
Windows Open
Force Arm>
17