Send Report ? (Command + 4+1 Or 4+2); Description; Using Send Report - Bosch D1260 Owner's Manual

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2)
FRONT DOOR is already bypassed.
indicates that the point has already been
bypassed.
FRONT DOOR cannot by bypassed.
indicates the system is programmed not to
allow that point to be bypassed.
Invalid point Please try again.
the entered point doesn't exist and the display
returns to allow another point to be entered.
No additional points.
no more points that can be bypassed.
6. You can return to idle text by pressing <Exit.
7. If you are attempting to unbypass a 24-Hour or
Fire Point that is still faulted, the keypad will
Cannot unbypass 24hr faulted points.
display
36
indicates that
indicates that there are
SEND REPORT ? (COMMAND + 4+1 or
4+2)

Description

This function tests the communication link between
your security system and your security company. It is
an important part of maintaining a high level of
security for your property.
Two types of test reports may be sent. The first type of
report is a simple test report (Command 41). The
second type of report is a status report (Command 42).
This status report indicates the current condition of
your system.

Using Send Report

1. Always call your security company before sending
a test report.
2. The display shows disarmed idle text.
Press the COMMAND key. The display shows
*System Command*
3. Press the 4 key then the 1 key to send a test report.
Press the 4 key then the 2 key to send a status
report.
Bosch Security Systems | 9/04 | 50410D
.