Change Time/Date (Command + 4 + 5) - Bosch D1260 Owner's Manual

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHANGE TIME/DATE (COMMAND + 4 + 5)

CHANGE TIME/DATE (COMMAND + 4 + 5)

The time and date in your system must be correct for
scheduled events to occur at the correct times. Check
the time at least once a month to ensure accuracy. Use
this function to set both the time and date. The system
uses a 12-hour, AM/PM format. There is the option to
continuously display the time and date in place of area
status. The Time and Date will be shown continuously
until a new command is entered or the current area's
status has changed. See CHANGE DISPLAY
(COMMAND + 4 + 9), Time/Date Display for more
information.
1. Ensure your keypad shows idle disarmed text.
2. Press the COMMAND key. The display shows
*System Command*
3. Press the 4 and then the 5 key.
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the CHG TIME/DATE ?>
prompt, press its adjacent soft key.
40
.
4. The display changes to
To just change the date, press the
key, See Step 6.
If you input the wrong time, press the
key to clear the time.
Enter the new time using a 12-hour (HH:MM)
format.
Ex: If the desired time is 12:34, press 1 + 2 + 3 +
4
The Set Date> soft key will disappear
when the first digit is entered.
Enter>
Press the soft key or the [ENTER] button.
5. The display changes to show
keys.
AM>
Press the soft key to select AM.
PM>
Press the soft key to select PM.
Enter new date:
6. The display shows
See Step 9 for use of the
soft key.
If you input the wrong date, press the
key to clear the time.
Bosch Security Systems | 9/04 | 50410D
Enter new time:
Set Date>
soft
<Exit
soft
AM> PM>
or soft
Time/Date Display>
<Exit
soft