Programming Area Names; Programming Security Company Information; D9412G, D9412 And D9112 Control Panels; Table 8: Area/Point Numbers And Area Text - Bosch D1260 Installation Manual

.
4.2

Programming Area Names

When the D1260/D1260B is installed with Bosch
Control Panels, Points 240 to 247 are used for the Area
Text Name for the Area (1 to 8) that the keypad is
assigned to. When the D1260/D1260B is installed with
the D7212G Control Panel, Points 240 to 243 can be
used for Area Text Name for the Area (1 to 4) that the
keypad is assigned to.
Points 240 to 247 can still be used in D9412 and
D9112 systems to detect alarms, although any custom
point text that is point specific is displayed as the Area
Name Text.
For example, if a D1260/D1260B is assigned to Area 1,
and the name of Area 1 is "WAREHOUSE," then you
would program the word "WAREHOUSE" into Point
240.
Refer to Table 8 for Area Name Text assignments. This
point text is used in the Bosch Control Panels to
program the Area Names.
Table 8: Area/Point Numbers and Area Text
Area Pt # Area Name Text – up to 16 characters
#
1* 240 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
2* 241 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
3* 242 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
4* 243 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
5 244 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
6 245 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
7 246 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
8 247 __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
*D7212G uses Points 240 to 243 for Area Name Text.
4.3 Programming Security Company
Information
Select Security Co. Info from the D1260/D1260B's
Help? menu to enter your security company's phone
number in case a subscriber needs to contact you.
4.3.1

D9412G, D9412 and D9112 Control Panels

If the keypad is connected to the D9412G, D9412 or
D9112 Control Panel, use the following steps to
program your security company's name and phone
number.
1. Double-click on the RPS icon.
2. Enter a valid username and password.
3. Double-click on the desired control panel.
Bosch Security Systems | 9/04 | 48101E
D1260/D1260B | Installation Guide | 4.0
4. Under "D9412 Program Record Sheet" locate the
5. Under Passcodes & Authority Levels, select Users
6. Scroll down the rows of Users to row User 249.
7. Double-click on the User 249 cell.
8. Type the phone number of the security company.
9. Click OK to finish.
Programming the Control Panel
section called "PASSCODES
(RADXUSR1/RADXUSR2)".
201 - 249.
A dialog box appears asking to change the text
USER 249.
13