Del User ? (Command + 5 + 3) - Bosch D1260 Owner's Manual

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DEL USER ? (COMMAND + 5 + 3)

DEL USER ? (COMMAND + 5 + 3)

This function allows a user to be deleted.
This function will delete the passcode,
Master User, and all sub-users associated
with the user number.
1. Ensure your keypad shows idle disarmed text.
2. Press the COMMAND key. The display shows
*System Command*
3. Press the 5 key and then the 3 key.
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the DEL USER ?>
prompt, press its adjacent soft key.
4. The display changes to show
deleted:
50
.
Enter user # to be
Enter the user number, not the passcode. (123 is as
an example.)
Enter>
Press either the
button.
5. If the user number entered is a valid user in the
system, the display will show
Are you sure?
(123 is as an example.)
If the user number entered is not a valid user in
the system, the display will show
currently not in use
6. Press the Yes> soft key to delete the user.
The display briefly shows that the user has been
deleted before returning to idle text (123 is used as
an example).
The user text is not deleted when deleting
a user. To modify a user's text, see
Add/Change User (Command 56).
Bosch Security Systems | 9/04 | 50410D
soft key or the ENTER
Delete User 123?
This user is
.