Mounting
1.
Mount the inlet socket. (Screw ×2)
Be careful of the mounting direction.
2.
Mount the plate. (screw ×4)
3.
Insert wiring to terminal A-A', B-B', [G1] to terminal C, [LOAD] to terminal D.
4.
Mount the upper panel and the side panel on the right in reversed order of removal.
HRS Series
Fig. 4.5-29 Mounting direction in inlet socket
Inlet socket
Fig. 4.5-30 Entry of connector
HRX-MM-N007
Chapter 4
Service Procedure
Power switch
4.5 Replacement Procedure
4-43