Mounting
1.
Install the tank.
2.
Mount the hoses and tank to the tank. (4 pcs.)
3.
Put the level switch cable [LS1] (2pcs.) through the grommet. Insert the pin to the
connector.
(No.2 & No.13)
4.
Mount the upper panel, the panels on both sides and the front panel in reversed order of
removal.
5.
Mount the tank lid.
HRS Series
Hose clamp
Hose
Hose clamp
Hose
Fig. 4.5-26 Hoses attaching
No.13
Fig. 4.5-27 Location to mount the connector
[Tips]
It does not matter which connector [LS1] is mounted to which socket.
Chapter 4
Fitting
Hose clamp
No.2
HRX-MM-N007
Service Procedure
4.5 Replacement Procedure
4-41