Festo CPV DI02 Series Brief Description page 18

5 Addressing
The following applies in general for addressing the
CPV Direct:
1. A CPV valve terminal always occupies 16 output
addresses.
A CP valve location occupies two addresses:
2. CP valve terminals, electric input or output modules on
the CP extension string each occupy 8, 16, ... input or
output addresses depending on the design. Note the
relevant documentation for the module.
Detailed specifications and examples of addressing the
CP system can be found in the manual P.BE−CP−DI02−...
18
lower−value address = pilot solenoid 14
higher−value address = pilot solenoid 12
Festo CPV...−GE−DI02−8 0704NH English