Input 4: TEMP,
Pt1000 / LG-Ni 1000
X60
Siemens Building Technologies
HVAC Products
2-wire circuit. Line balancing is not required if the resistances of the measuring leads
are small compared to the sensor's resistance.
The TL function is active.
The sensors to be used are QAE22.5A and QAE21.1.
Start of measuring range:
End of measuring range:
Parameter:
Basic Documentation LMV51...
6 Temperature or pressure controller (internal load controller LC)
0 °C or 32 °F
150 °C or 302 °F
or (can be parameterized)
400 °C or 752 °F
MeasureRange PtNi
79/278
CC1P7550en
01.10.2003