Selecting The Actuator's Direction Of Rotation; Lmv51; Lmv52 - Siemens LMV5 Series Basic Documentation

6. Selecting the
actuator's direction of
rotation
Menu level 1 Menu level 2
Params & Display
Actuators

7. LMV51...

Activating and
deactivating the actuator
Menu level 1 Menu level 2
Params & Display
RatioControl

LMV52...

activating and
deactivating the
actuators
Menu level 1 Menu level 2
Params & Display
RatioControl
150/278
Siemens Building Technologies
HVAC Products
Menu level 3
DirectionRot
Select the direction of rotation with Standard or Reversed.
The standard direction of rotation is anticlockwise when facing the end of the drive shaft
( → «Display and operating unit AZL5...»).
To check the direction of rotation, every actuator can be rotated when in the
Note:
home position (see item 11). After setting the ignition positions / curves, the
direction of rotation can only be changed after canceling the curves and the
ignition positions on the setting menu «DeleteCurves».
Depending on the application and the type of fuel (with or without auxiliary actuator),
the auxiliary actuator can be activated or deactivated, or used as a VSD (only
LMV51.2...).
Menu level 3
GasSettings
OilSettings
In accordance with the application and the type of fuel, the actuators can be activated
or deactivated. Here, it is also defined whether the relevant actuator influences the air
volume.
Menu level 3
GasSettings
OilSettings
Basic Documentation LMV51...
8 Commissioning instructions for the LMV5... system
Menu level 4 Menu level 5
DeleteCurves
1. AirActuator
2. GasActuat.(Oil)
3. OilActuator
4. AuxActuator
5. AuxActuator 2
6. AuxActuator 3
Menu level 4 Menu level 5
Actuator
Actuator
Menu level 4 Menu level 5
AirActuator
AuxActuator 1
AuxActuator 2
AuxActuator 3
VSD
AirActuator
AuxActuator 1
AuxActuator 2
AuxActuator 3
VSD
Menu level 6
Menu level 6
Menu level 6
CC1P7550en
01.10.2003