Bios Update - Supermicro C9Z490-PG User Manual

4.9 BIOS Update

The following items will be displayed:
•
BIOS Version
•
BIOS Tag
•
Date
•
Time
Start Update
Use this utility to prepare BIOS Update with ME.
1. Click "Start Update" enter the SuperFlash utility.
2. At the prompt, select "Yes" to reboot and configure the system to Flash mode. Select
"No" to cancel and view the BIOS information.
3. After the system reboots to the flash mode, the system is ready to flash the BIOS. At
the prompt, slect "OK" to continue.
4. Select "Select File" and then in the pop-up menu select "General USB Flash Disk 1.00."
5. Select the filename (i.e., "C9Z490-PGW") in the pop-up menu.
6. Select "Start Flash" to flash the BIOS. A pop-up message will appear to show the
progress of the BIOS flash.
7. If the flash is successful, a pop-up message will indicate the result. Select "OK" to
complete the BIOS flash and to reboot the system. Check the System Information
section of the BIOS Setup to check for the correct BIOS version.
131
Chapter 4: UEFI BIOS