Motherboard Features - Supermicro C9Z490-PG User Manual

Motherboard Features

CPU
•
Supports a single 10th Gen Intel Core i9/i7/i5/i3, Pentium, and Celeron series processor with up to 10 cores and a thermal
design power (TDP) of up to 125W
Memory
•
Supports up to 128 of Unbuffered non-ECC UDIMM (288-pin) memory with speeds of up to 2933 MHz in four memory slots.
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory capacity and frequency is CPU dependent.
Note 2: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel PCH Z490
Expansion Slots
•
One (1) PCI-E 3.0 x1 Slot (PCH SLOT4)
•
Two (2) PCI-E 3.0 x8/x16 Slots (CPU SLOT1, CPU SLOT5: Supports Auto Switch)
•
One (1) PCI-E 3.0 x16 Slot (CPU Slot 3, CPU Slot 7)
•
Two (2) M.2 PCI-E 3.0 x4 Sockets (Support M Key 2260, 2280, and 22110)
Network
•
Intel Ethernet i219-V
•
Aquantia Ethernet AQC107
I/O Devices
•
Serial (COM) Port
•
SATA 3.0
•
Video Port
Peripheral Devices
•
Two (2) front accessible USB 2.0 headers with four (4) USB connections (USB0/1, USB2/3)
•
Two (2) USB 3.2 Gen 1 ports on the rear I/O panel (USB4/5)
•
Three (3) USB 3.2 Gen 2 ports on the rear I/O panel (USB6/7/8)
•
One (1) USB 3.2 Gen 2x2 port on the rear I/O panel (USB9)
•
One (1) front accessible USB 3.2 Gen 1 header with two (2) USB connections (USB10/11)
•
One (1) front accessible USB 3.2 Gen 2 20-pin connector with one (1) USB connections (USB12)
Note: The table above is continued on the next page.
Motherboard Features
•
One (1) front accessible serial port header (COM1)
•
Four (4) SATA 3.0 ports at 6 Gb/s (I-SATA0~3 with RAID 0, 1, 5, 10)
•
One (1) DisplayPort connection on the rear I/O panel
•
One (1) HDMI connection on the rear I/O panel
15
Chapter 1: Introduction
http://www.supermicro.com/products/