Table of Contents
Advertisement
Chapter 1: Firmware Updates for the X12MP/X12DP/X12SP/B12/H12/BH12 Motherboards
1.3.2 Selecting an Image File for Firmware (BIOS) Update
1
1
The screen above allows you to choose an image file for your firmware (BIOS) update. Follow
the instructions below to update your BIOS to a desired BIOS version.
1. Click Select File
1
stored in the hard drives of your machine used to update the BIOS for the host server.
2. Select the file that you want to use for the BIOS update
you've selected will appear on the Select File field
3. To de-select the file that you've just chosen for BIOS update, click Cancel
allow you to select another image file for your BIOS update.
4. Once you've finalized your selection, click Upload
selected image file.
5. A warning will display asking you to power off the system before you proceed with BIOS
update as shown below. Click Power Off before updating your BIOS.
Warning! Be sure to power off your system before updating your BIOS! After BIOS
upgrading is complete, the system will reboot, and the new BIOS utility will take effect
after the system reboot.
2c
2c
3
3
to browse the files that are available to you, including the files
13
2a
2a
2b
2b
4
4
2a
and click Open
2c
as shown above.
to update your BIOS using your
4
5
2b
. The file
which will
3
Advertisement
Table of Contents
