Bios Update - Supermicro C9X299 User Manual

Super C9X299-PG300F User Manual

4.10 BIOS Update

This menu is used to update the BIOS version manually. Two columns on information are
shown. The left column shows CURRENT BIOS information. The right column shows NEW
BIOS information. Use the "Start Update" feature to begin flashing the new BIOS.
Start Update
Following these steps to prepare the BIOS Update with ME:
1. Click Start Update to enter the SuperFlash utility.
2. At the prompt, select Yes to reboot and configure the system to Flash mode. Select No to
cancel and view the BIOS information.
3. After the system reboots to the flash mode, the system is ready to flash the BIOS. At the
prompt, select OK to continue.
4. Select File and then in the pop-up menu select General USB Flash Disk 1.00.
5. Select the filename (i.e., "C9X299-PG300F") in the pop-up menu.
6. Select Flash to flash the BIOS. A pop-up message will appear to show the progress of
the BIOS flash.
7. If the flash is successful, a pop-up message will indicate the result. Select OK to complete
the BIOS flash and to reboot the system. In the BIOS setup, confirm the BIOS version on
the upper motherboard information section.
110