Huawei UPS5000-H-1200 Series User Manual page 96

UPS5000-H-1200 kVA
User Manual (100 kVA Power Modules)
Table 4-7 Battery Status
Item
Battery Status
Voltage (V)
Current (A)
Temperature (° C) (only for
lead-acid batteries)
Backup time (min)
Remaining cap. (%)
SOH
Maximum Cell Temperature
(° C) (only for lithium
batteries)
Min Cell Temperature (° C)
(only for lithium batteries)
Table 4-8 Total Runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Table 4-9 Environment Data
Item
Ambient temperature (° C)
Issue 01 (2020-07-15)
The value takes an integer. For example,
 If the value is less than 1, the value takes 0.
 If the value is greater than or equal to 1 and less than 2, the value takes 1.
Copyright © Huawei Technologies Co., Ltd.
Description
Lead-acid battery: The value can be Not connected,
Equalized charging, Float charging, Hibernating,
discharging, or Not chg. or dis.
Lithium battery: The value can be Not connected, Float
charging, discharging, or Not chg. or dis.
Voltage of the battery string
Current of the battery string (the current is + when
batteries are being charged and – when discharged)
Current operating temperature of the battery (A battery
sensor is required. If no sensor is connected, N/A is
displayed.)
Battery backup time estimated at the current load
Remaining battery capacity
State of health
-
-
Description
Total time during which the UPS runs in bypass mode
Total time during which the UPS runs in inverter mode
Description
Temperature measured by the ambient temperature and
humidity sensor (An ambient temperature and humidity
4 User Interface
88