Huawei UPS5000-H-1200 Series User Manual page 105

UPS5000-H-1200 kVA
User Manual (100 kVA Power Modules)
Item
HTTPS
ModbusTCP
SNMP
ModbusRTU
Issue 01 (2020-07-15)
Description
and cannot be accessed.
Enable: The SSH port is enabled
and can be accessed.
Refers to a secure transmission
protocol used to access the UPS
through a browser.
Disable: The HTTPS services are
unavailable.
Read-only: Only operator users
are allowed to access the services
and have only the read permission.
Enable: All functions are
available.
Refers to an Ethernet-based
Modbus protocol used to connect
to the NetEco.
Disable: The Modbus TCP
services are unavailable.
Read-only: Only the read
permission is enabled. Settings are
not allowed.
NetEco: The read permission and
the write permission on related
parameters supported by the
NetEco are enabled.
Enable: All functions are
available.
Refers to the Simple Network
Management Protocol used to
connect to the NetEco.
Disable: The SNMP services are
unavailable.
Read-only: Only the read
permission is enabled. Settings are
not allowed.
NetEco: The read permission and
the write permission on related
parameters supported by the
NetEco are enabled.
Enable: All functions are
available.
Refers to a Modbus protocol based
on the RS485 bus, which is used to
connect to the NetEco.
Disable: The Modbus RTU
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Range
Value
Enable Disable, Enable,
Read-only
Enable Disable, Enable,
Read-only,
NetEco
Enable Disable, Enable,
Read-only,
NetEco
Enable Disable, Enable,
Read-only,
NetEco
97