Obtaining Startup Password; Settings Wizard - Huawei UPS5000-H-1200 Series User Manual

UPS5000-H-1200 kVA
User Manual (100 kVA Power Modules)




5.1.2.1 Obtaining Startup Password

Procedure
Step 1 Download and install the Service Expert app.
Step 2 On the app home screen, tap StartUp to access the Set Startup screen.


----End

5.1.2.2 Settings Wizard

Procedure
Step 1 Set the language, time, network parameters, system parameters, and battery parameters on the
Settings Wizard screen.
Set system parameters with caution because the settings determine whether the UPS can
operate normally.
Issue 01 (2020-07-15)
If the UPS is powered on for the first time, you need to obtain the startup password from
the Service Expert app. Skip this step if the UPS is not powered on for the first time.
The Service Expert app can be downloaded from Google Play Store and can run on
Android.
This document corresponds to the app version V100R001C00SPC111.
Online Startup
a. Insert the WiFi module into the USB port on the MDU. Enable the mobile phone
WLAN, search for the UPS_WIFI signal, and connect to the WiFi signal. The
password is Changeme.
b. Set the Site and Device Type as required, and connect the device. Set IP to
192.168.0.10, Port to 443, Username to admin, Password to Changeme, and
click Login.
c. After login, tap Power-on password activation on the screen. A message is
displayed, indicating whether to start the UPS. Tap OK.
Offline Startup
a. Set Site and Device Type as required, and tap Offline Activation.
b. Enter Bar code and Verification code obtained from the LCD on the Offline
Activation screen. Tap Generate PWD to generate a startup password.
c. Enter the generated password in the password text box on the LCD to start the
inverter.
Copyright © Huawei Technologies Co., Ltd.
5 Operations
135