Control And Connection - PBI Dansensor MAP Check 9000 User Manual

MAP Check 9000 - User Manual

10.5. Control and connection

MAP Check 9000 control:
• Display:
• Control:
• Measuring accuracy:
• Measuring ranges:
Possible connections to the MAP Check 9000:
• Gas supply:
• CAN bus:
• RS232C:
• Alarm relays:
• Current outputs:
• Voltage outputs:
• Measure input:
All electrical inputs and outputs have been galvanically separated from the internal
electronics by means of optocouplers.
PBI-Dansensor A/S
4-digit red LED display (not MAP Check 900X-2)
4 front keys. No key function is activated until the key in
question is released. (Not MAP Check 900X-2).
More accurate than +/- 1% of the value measured +/- 1
digit in calibrated measuring range
20.9 % - 1 ppm for MAP Check 900X-1/-2
20.9 % - 0.01 pppm for MAP Check 9001-4
Gas inlet on the back
Data transmission to and from a soldering machine or the
like (option).
Serial communication. For connection of e.g. PC.
Used for data transmission to PC and/or remote control of
MAP Check from e.g. PC (option).
2 user-defined relays (O
1 flow / system error / ready relay. Max. 48V,1A
Up to two outputs, programmable 0-20 or 4-20 mA, with
user-defined scale (e.g. 0-1 %, 10-20.9 % or 0-100 ppm
O ) (option).
2
Up to two outputs, programmable 0-10V or 2-10V, with
user-defined scale (e.g. 0-1 %, 10-20.9 % or 0-100 ppm
O ) (option).
2
10-32VDC external pump control. Consumption: 10mA.
COPYRIGHT ©
10. Specifications
- alarms). Max. 48V,1A
2
PBI-220047-F 01/2008
41