Setting O2 Output - PBI Dansensor MAP Check 9000 User Manual

MAP Check 9000 - User Manual
4.10. Setting O
PA.2
The parameter
O concentration. Depending on the measuring range in which the individual MAP Check
2
9000 is intended to operate, it features different types of measuring gas hoses inside. MAP
Check 9000 units which are only intended to measure in the percentage range have been
equipped with measuring gas hoses which cannot be used in connection with measurement
in the low-ppm area. MAP Check 9000 units intended for output in the low-ppm area can
easily be set so that they only output O
intended for display in the percentage range is set to output O
result is not reliable when the O
%/ppm
PA2:
1
read-out
PBI-Dansensor A/S
output
2
is defined in the setup menu. The first digit determines the output of the
output is outside the measuring range of the device.
2
0 0
Must not be changed
MAP Check 9000 O concentration readout
0 : % with up to two decimals
1 : % with up to two decimals and ppm in integers (automatic range shift)
2 : % with up to two decimals and ppm with up to two decimals (automatic range shift)
0
100.0 - 10.0%
9.99 - 0.00%
COPYRIGHT ©
in the percentage range. If an MAP Check 9000
2
2
1
100.0 - 10.0%
9.99 - 0.00%
9999 ppm - 0 ppm 9999 ppm -
4. Operation
in the ppm area as well, the
2
2
100.0 - 10.0%
9.99 - 0.00%
100 ppm
99.9 - 10.0 ppm
9.99 - 0.00 ppm
PBI-220047-F 01/2008
17