Digital Read Out (Optional) - HARWI ORCA Series Manual

DIGITAL READ OUT
The digital read out is used for accurate
adjusting of the measure for cutting
horizontally. The measure can be adjusted
from bottom supports, from the midway
fences and from the top side of the material.
ADJUSTING FROM THE BOTTOM SUPPORTS
Put the saw unit in horizontal position
1
(Fig. 38)
Press button . The digital read out
2
shows ABS (Fig. 39A).
Absolute measuring is now activated.
3
Fasten the motor carriage with the knob
4
at the right side at the correct height.
ADJUSTING FROM THE MIDWAY FENCES
Put the saw unit in horizontal position
1
above the midway fences (Fig. 38).
Press button , the digital read out
2
shows a small arrow (Fig. 39B).
Measuring from the midway fences is now
3
activated.
Fasten the motor carriage with the knob
4
at the right side at the correct height.
Fig. 38
Fig. 39A-B
35
(OPTIONAL)