Cleaning - HARWI ORCA Series Manual

MAINTENANCE

CLEANING

Clean the machine, specially the work spots
and the aluminium strips, frequently.
Perform following maintenance weekly:
1 Clean tracks at the lower and upper side
of the frame.
2 Clean bearings at the down and upper
side of the slide-way.
3 Clean tracks of the slide-way and clean
bearings of the carriage.
4 Clean guiding spindles of pressure pad.
5 Brush the air inlet of the motor and
check if it is not obstructed.
6 Clean spindle of depth adjustment and
lubricate slightly.
7 Check dust extraction.
8 Check the tension of the toothed belt.
Check the following points monthly.
8 Wear and tear of cables.
9 Broken or torn parts of the electric
circuit.
10 Brake time of saw-blade (stopping time
is 10 seconds).
11 Operation of the end switch in the safety
guard.
12 Operation and wear and tear of the
pressure pad.
25