SUN2000-(33KTL, 40KTL)-JP
User Manual
Figure 6-32 Tightening screws on the maintenance compartment door
Figure 6-33 Removing a standby floating nut
----End
Issue 07 (2019-06-30)
If a screw on the maintenance compartment door is missing, use the unused ground screw on the
enclosure shell as a standby screw.
If the floating nut used for securing the maintenance compartment door is missing, use the reserved
floating nut shown in
Figure
Copyright © Huawei Technologies Co., Ltd.
6 Electrical Connections (12-pin Spot-Check Terminal)
6-33.
91