SUN2000-(33KTL, 40KTL)-JP
User Manual
Step 2 Determine the positions for drilling holes using the mounting bracket, as shown in
4-24. Level the hole positions using a level, and mark the hole positions using a marker.
Figure 4-24 Determining hole positions
Step 3 Drill holes using a hammer drill, as shown in
Figure 4-25 Drilling holes
Step 4 Align the mounting bracket with the hole positions, insert bolt assemblies (flat washers,
spring washers, and M12x40 bolts) into the holes through the mounting bracket, secure them
using the shipped stainless steel nuts and flat washers, and tighten the bolts to a torque of 45
N· m using an 18 mm socket wrench, as shown in
Issue 07 (2019-06-30)
You are advised to apply anti-rust paint on the hole positions for protection.
Copyright © Huawei Technologies Co., Ltd.
Figure
4-25.
Figure
4-26.
4 System Installation
Figure
35