SUN2000-(33KTL, 40KTL)-JP
User Manual
Issue 07 (2019-06-30)
Figure 5-27 Connecting communications cables
g.
Bundle communications cables after connecting them.
Figure 5-28 Binding communications cables
h.
Use a torque wrench with an open end of 33 mm to tighten the locking cap to a
torque of 7.5 N•m.
Method 2: Connecting to an RJ45 network port
a.
Insert the stripped core wires of the network cable to the RJ45 connector in
sequence, as shown in
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections (2-pin Spot-Check Terminal)
Figure
5-29.
60