Huawei SUN2000-33KTL-JP User Manual page 88

SUN2000-(33KTL, 40KTL)-JP
User Manual
Figure 6-18 Measuring the DC input voltage
Before performing
Step 4 Insert the positive and negative connectors into the corresponding positive and negative DC
input terminals of the SUN2000 until they snap into place, as shown in
After the positive and negative connectors snap into place, pull the DC input power cables
back to ensure that they are connected securely.
Issue 07 (2019-06-30)
Step 4, ensure that the two DC switches are OFF.
Copyright © Huawei Technologies Co., Ltd.
6 Electrical Connections (12-pin Spot-Check Terminal)
Figure 6-19.
81