Table of Contents
Advertisement
SUN2000-(33KTL, 40KTL)-JP
User Manual
Figure 6-11 Connecting an AC output power cable (four core wires)
Step 8 Use a torque wrench with an open end of 52 mm to tighten the locking cap to a torque of 7.5
N m.
----End
Follow-up Procedure
Check that the cables are connected correctly and securely, and then seal the cable holes with
firestop putty.
6.4 Installing the DC Input Power Cable
Prerequisites
Issue 07 (2019-06-30)
The cable colors in figures are for reference only. Select appropriate cables according to the local
standards.
Copyright © Huawei Technologies Co., Ltd.
6 Electrical Connections (12-pin Spot-Check Terminal)
75
Advertisement
Table of Contents
