SUN2000-(33KTL, 40KTL)-JP
User Manual
(1) White and orange
(5) White and blue
Issue 07 (2019-06-30)
Figure 6-27 Connecting communications cables
g.
Bundle communications cables after connecting them.
h.
Use a torque wrench with an open end of 33 mm to tighten the locking cap to a
torque of 7.5 N•m.
Method 2: Connecting to an RJ45 network port
a.
Insert the stripped core wires of the network cable to the RJ45 connector in
sequence, as shown in
Figure 6-28 Connecting wires to an RJ45 connector
b.
Crimp the RJ45 connector using a crimping tool.
c.
Remove the locking cap from the COM1 cable gland at the SUN2000 bottom and
remove the plug from the locking cap.
Copyright © Huawei Technologies Co., Ltd.
6 Electrical Connections (12-pin Spot-Check Terminal)
Figure
6-28.
(2) Orange
(3) White and green
(6) Green
(7) White and brown
(4) Blue
(8) Brown
88