SUN2000-(33KTL, 40KTL)-JP
User Manual
Figure 4-10 Removing a security torx wrench
Step 2 Determine the positions for drilling holes using the mounting bracket, as shown in
4-11. Level the hole positions using a level, and mark the hole positions using a marker.
Figure 4-11 Determining hole positions
Step 3 Drill holes using a hammer drill and install expansion bolts, as shown in
Avoid drilling holes in the water pipes and power cables buried in the wall.
An expansion bolt contains four parts, as shown in
Issue 07 (2019-06-30)
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
Figure
Figure
4-12.
Figure
4-13.
27