Moving The Sun2000; Installing The Mounting Bracket - Huawei SUN2000-33KTL-JP User Manual

SUN2000-(33KTL, 40KTL)-JP
User Manual

4.4.2 Moving the SUN2000

For details, see

4.4.3 Installing the Mounting Bracket

Context
Figure 4-22
Figure 4-22 Hole distances of a mounting bracket
Procedure
Step 1 Remove the security torx wrench from the mounting bracket and set it aside.
Figure 4-23 Removing a security torx wrench
Issue 07 (2019-06-30)
For ease of installing the SUN2000 on the mounting bracket, connecting cables to the bottom of the
SUN2000, and maintaining the SUN2000 in future, it is recommended that the bottom clearance be
greater than or equal to 300 mm and less than or equal to 730 mm. If the site cable is hard, the space at
the bottom is recommended to be within the range of 600 mm and 730 mm. If you have any questions
about the distance, consult the local technical support engineers.
4.3.2 Moving the
shows the hole distances of the SUN2000 mounting bracket.
The SUN2000 mounting bracket has 16 tapped holes in four groups. Mark any hole in each group based
on site requirements and mark four holes in total. Two round holes are preferred.
Copyright © Huawei Technologies Co., Ltd.
SUN2000.
4 System Installation
34