Dräger Medical Zeus Technical Documentation Manual page 130

Technical Information
Technical Documentation for Zeus
according to EMC standard IEC/EN 60601-1-2: 2001
General Information
The EMC conformity of the
transducers and accessories that are listed in the Zeus
06 or greater; English: order-no. MK01159 RI 02 or greater).
Additionally, accessories may be used which do not affect EMC compliance, if no other reasons (see refer-
ence to list of accessories in the IfU) interdict the use of them. The non-observance may result in increased
emissions or decreased immunity of the equipment.
®
Zeus Anaesthesia Workstation System
The
ment; if adjacent or stacked use is inevitable, the
served to verify normal operation in the configuration in which it will be used.
Other equipment which can be used adjacent to or stacked with this device are listed in Zeus
sories or if a EC Declaration of Compatibility is available by Dräger Medical.
Electromagnetic Emissions
®
The Zeus Anaesthesia Workstation System
specified below. The user of the
such an environment.
Emissions
RF emissions (CISPR 11)
Harmonic emissions
(IEC 61000-3-2)
Voltage fluctuations / flicker
(IEC 61000-3-3)
Information re electromagnetic emissions (IEC 60101-1-2: 2001, table 201)
®
Anaesthesia Workstation System
®
Zeus Anaesthesia Workstation System
should not be used adjacent to or stacked with other equip-
Zeus
Electromagnetic Emissions
®
Zeus Anaesthesia Workstation System
Compliance Electromagnetic environment
according to
Group 1
The
energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
Class A
The
able for use in all establishments other than domestic and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Not applicable N/A if RF emissions are class A
Not applicable N/A if RF emissions are class A
page 1 of 3
includes the use of external cables,
®
List of Assessories (German: order-no. MK02818 RI
®
Anaesthesia Workstation System
is intended for use in the electromagnetic environment
®
Zeus Anaesthesia Workstation System
®
Zeus Anaesthesia Workstation System
October, 30 2004
should be ob-
®
List of Acces-
should assure that is used in
uses RF
is suit-