Set Up A Single Phone For A Headset; Headset Administration On Multiplatform Phones - Cisco 500 Series Administration Manual

Cisco Headset Administration
Procedure
Step 1
Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2 Select Device > Device Settings > Common Phone Profile
Step 3
Locate the phones.
Step 4 Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5
Check the Override Enterprise Settings check box for any changed fields.
Step 6 Click Save.
Step 7
Click Apply Config.
Step 8 Restart the phones.
Related Topics

Set Up a Single Phone for a Headset

You can configure a single phone for headset support. To configure a group of phones, use the Common
Phone Profile.
Procedure
Step 1 Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2 Select Device > Phone
Step 3
Locate the phone associated with the user.
Step 4 Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5
Check the Override Enterprise/Common Phone Profile Settings check box for any changed fields.
Step 6 Click Save.
Step 7
Click Apply Config.
Step 8 Restart the phone.
Related Topics

Headset Administration on Multiplatform Phones

Cisco IP Phones with Multiplatform Firmware Release 11.1.2 or later support the Cisco Headset 520 Series
and Cisco Headset 530 Series. The headsets don't require any administration on multiplatform phones. However,
you should install the latest Multiplatform firmware release before connecting your headset to a phone.
Set Up a Single Phone for a
Cisco Headset 500 Series Parameters on Cisco Unified Communications
Set Up a Group of Phones for
Cisco Headset 500 Series Parameters on Cisco Unified Communications
Headset, on page 25
Headsets, on page 24
Cisco Headset 500 Series Administration Guide
Set Up a Single Phone for a Headset
Manager, on page 24
Manager, on page 24
25