Cisco Headset 500 Series Parameters On Cisco Unified Communications Manager; Set Up A Group Of Phones For Headsets - Cisco 500 Series Administration Manual

Cisco Headset 500 Series Parameters on Cisco Unified Communications Manager

Table 8: Product Specific Configuration Fields for Headsets in Cisco Unified Communications Manager
Configuration Field Name
Side USB Port
(Cisco IP Phone 8851,
8851NR, 8861, 8865, and
8865NR only)
Back USB Port
(Cisco IP Phone 8861,
8865, and 8865NR only)
Related Topics
Cisco Headset 500 Series Parameters on Cisco Unified Communications
Manager
The following table describes the fields in the Product Specific Configuration Layout pane that need to be
configured for headset use.
For more detailed information, see the Feature Configuration Guide for Cisco Unified Communications
Manager.
Table 9: Product Specific Configuration Fields for Headsets in Cisco Unified Communications Manager
Field Name
Side USB Port
Back USB Port

Set Up a Group of Phones for Headsets

You can configure a group of phones for headset support.
Cisco Headset 500 Series Administration Guide
24
Cisco Headset 520 Series
Applicable
Applicable
Cisco Headset 500 Series Parameters on Cisco Unified Communications
Field Type or
Choices
Disabled
Enabled
Disabled
Enabled
Cisco Headset 530 Series
Applicable
Applicable
Default Description and Usage Guidelines
Enabled Controls the ability to use the USB port on the side
of the Cisco IP Phones 8851, 8851NR, 8861, 8865,
and 8865NR.
The side USB port or the back USB port must be
enabled for users to connect the USB connectors for
the Cisco Headset 500 Series.
Enabled Controls the ability to use the USB port on the back
of the Cisco IP Phones 8861, 8865, and 8865NR.
The side USB port or the back USB port must be
enabled for users to connect the USB connectors for
the Cisco Headset 500 Series.
Cisco Headset Administration
Cisco Headset 560 Series
Applicable
Applicable
Manager, on page 24