Cisco 500 Series Administration Manual page 12

Deploy Your Cisco Headset 560 Series
Step 3 You can connect a second call device with the Cisco Headset 560 Series with Multibase. Connect the mini-USB
cable into the left port on the back of the base.
Note
Step 4 Optional: You can also connect the multibase to a Bluetooth device such as a mobile phone. See
Multibase to a Bluetooth Device, on page 7
Step 5
Plug the power cord into the back of the base.
What to do next
Your headsets function with full call control capabilities on a Cisco IP Phone without any changes through
Cisco Unified Communications Manager Administration. However, some headset features are only available
after activation by a Cisco Unified CM Administrator. See
more information.
Cisco Headset 500 Series Administration Guide
6
For best call quality, use the standard USB cable with a Cisco IP Phone and the mini-USB cable
with a laptop or other call device.
for more information.
Cisco Headset Administration, on page 11
Cisco Headset 500 Series Set Up
Connect the
for