Connect The Multibase To A Bluetooth Device; Related Documentation; Cisco Help Center; Cisco Headset Documentation - Cisco 500 Series Administration Manual

Cisco Headset 500 Series Set Up

Connect the Multibase to a Bluetooth Device

The Cisco Headset 560 Series Multibase can connect to Bluetooth devices such as a mobile phone or tablet.
The headset base appears on your call device as Cisco Headset followed by the last three digits on your
headset serial number.
Note You can find your headset serial number in the lower right corner on the underside of your base.
The multibase can store up to four different paired Bluetooth devices. If you already have four paired devices,
the base will replace the device which has not been used in the longest time.
Procedure
Step 1 Press the Bluetooth button on the back of the multibase twice to start pairing.
Step 2
Select your headset from the Settings menu on your device.
The Bluetooth LED lights white when pairing is successful.

Related Documentation

Use the following sections to obtain related information.

Cisco Help Center

For support articles for Cisco Webex Share, Cisco Webex Teams, Cisco Webex Calling, Cisco Webex
Meetings, and other Cisco Webex products, go to the following URL:
https://help.webex.com/

Cisco Headset Documentation

Refer to publications that are specific to your language, headset model, and call control system. Navigate
from the following documentation links:
https://www.cisco.com/c/en/us/support/collaboration-endpoints/headset-500-series/
tsd-products-support-series-home.html
https://www.cisco.com/c/en/us/support/collaboration-endpoints/headset-700-series/
tsd-products-support-series-home.html

Cisco IP Phone 6800 Series Documentation

See the publications that are specific to your language, phone model, and multiplatform firmware release.
Navigate from the following Uniform Resource Locator (URL):
Connect the Multibase to a Bluetooth Device
Cisco Headset 500 Series Administration Guide
7