Cisco 500 Series Administration Manual page 25

Cisco Headset Administration
Parameter
Equalizer
Audio Bandwidth
Bluetooth
Conference
Firmware Source
Range Default
Warmest – Brightest Default
Wide Band, Narrow Wide
Band Band
On, Off On
On, Off On
Allow from UCM or Allow
Cisco Cloud (firmware from
will upgrade only), UCM or
Restrict to UCM only Cisco
(firmware may Cloud
upgrade or downgrade)
Headset Template Management
Notes
Controls the Equalizer settings. Warmer settings
mean users hear more bass in their headsets,
while a brighter setting means users hear more
treble.
This parameter applies to all headsets in the
Cisco Headset 500 Series.
Controls the Digital Enhanced cordless
Telecommunications (DECT) codec in the Cisco
Headset 560 Series.
In a dense DECT environment, set the field to
Narrow Band to limit the Cisco Headset 560
Series to the G.726 codec.
Controls the use of Bluetooth on the Cisco
Headset 560 Series with Multibase. When this
parameter is set to Off, the base deletes all
devices paired with it.
You can disable Bluetooth if your
Note
users are operating in an
environment in which information
security is at a premium.
Controls the use of the conferencing feature on
the Cisco Headset 560 Series. Conferencing
allows up to three guest headsets to pair with
the same base at once.
See Cisco Headset 500 Series User Guide for
more information on conferencing.
Controls the headset's firmware upgrade source.
By default, users can upgrade their headset
through a Cisco IP Phone connected to Unified
Communications Manager or through Cisco
Jabber for Windows or Mac. You can restrict
your headsets to only accept firmware changes
through a Unified Communications Manager
source.
Cisco Headset 500 Series Administration Guide
19