Development Environment; System Requirements; Development Toolchains; Demonstration Software - ST STM32F3DISCOVERY User Manual

Development environment

3 Development environment
3.1

System requirements

•
Windows
•
USB Type-A or USB Type-C
3.2

Development toolchains

•
IAR Systems - IAR Embedded Workbench
•
Keil
•
STMicroelectronics - STM32CubeIDE
3.3

Demonstration software

The demonstration software, included in the STM32Cube MCU Package corresponding to
the on-board microcontroller, is preloaded in the STM32 Flash memory for easy
demonstration of the device peripherals in standalone mode. The latest versions of the
demonstration source code and associated documentation can be downloaded from
www.st.com.
4

Conventions

Table 3 provides the definition of some conventions used in the present document.
Jumper JPx ON
Jumper JPx OFF
Solder bridge SBx ON
Solder bridge SBx OFF
Note: Board figures and photos in this document are based on version B, versions C, D, and E are
similar.
a. macOS
b. On Windows
8/36
®
OS (7, 8 and 10), Linux
® (b)
- MDK-ARM

Table 3. ON/OFF conventions

Convention
Jumper fitted
Jumper not fitted
SBx connections closed by solder
SBx connections left open
®
is a trademark of Apple Inc. registered in the U.S. and other countries.
®
only.
®
64-bit or macOS
®
to Mini-B cable
®(b)
UM1570 Rev 6
®(a)
Definition
UM1570