Appendix C - Mounting The Irg5140 - Perle IRG5140+ Series Hardware Installation Manual

Appendix C - Mounting the IRG5140

Mounting the router on a DIN Rail
1. The DIN rail clip will be fixed to the back of the router unit when you receive the unit.
2. Position the router such that the top hooks of the DIN rail clip attach onto the top of the DIN rail.
3. Rotate the bottom of the router towards the rail. This will snap the bottom hooks of the DIN rail-
clip onto the bottom of the DIN rail.
See diagram below
Removing the router from the DIN Rail
1. The DIN rail attachment clip has a slot at the bottom of the latch that is visible beneath the router
when it is mounted.
2. Insert a flat blade screwdriver into the slot and twist the base to release the clip. Alternatively a
downward force on the clip will release the clip.
3. When the clip is released, pull the bottom of the router out slightly and remove it from the DIN
rail.
Perle IRG5140+ Series Router Hardware Installation Guide
Appendix C - Mounting the IRG5140
21