Managing The Irg5140 - Perle IRG5140+ Series Hardware Installation Manual

Reset / Factory Default / Safe Mode

Managing the IRG5140

The IRG5140 can be configured, operated and monitored using any of the following methods. See the
Perle IRG5000 Series Router User's Guide for more details on these methods.
WebManager
The Perle WebManager is an embedded Web based application that provides an easy to use a browser
interface for configuring and managing the IRG5140. WebManager is accessible through any stan-
dard desktop web browser. You must have pre-configured a valid IP address on the IRG5140 before
connecting with the WebManager.
CLI
A text-based Command Line Interface based on industry standard syntax and structure. The CLI can
be accessed from the console port. Once a valid IP address is configured on the IRG5140, Telnet,
SSH or the Web interface can also be used to access the IRG5140 for administration purposes. See the
Perle IRG5000 Series Router CLI Reference Guide for more information.
SNMP
The IRG5140 can be managed with an SNMP compatible management station that is running plat-
forms such as HP Openview.
Fast Setup Mode
If your router is in "Factory Default" mode, when you first connect, you will be in "Fast setup mode".
For more details, see - Fast Setup.
PerleView
A Windows server-based centralized management package that simplifies the configuration, adminis-
tration, monitoring, and troubleshooting of Perle Managed Media Converters, Ethernet Copper
Extenders, Industrial Switches, and the IRG Series of Perle Routers. Your Internet browser, can
securely access PerleVIEW and manage 10's, 100's or thousands of Perle devices from a centralized
server.
IRG5140+
Perle Series Router Hardware Installation Guide
12